Abstract
This paper presents low-voltage low-power limiter, RSSI, and demodulator designs for a low-IF wireless FSK receiver. The IF is located at 3MHz. The FSK demodulator is implemented by a delay-locked loop associated with the techniques of digital offset cancellation and modified phase-frequency detection. The demodulated data can be recovered with one-clock latency. The circuits in limiter and RSSI are all pseudo differential to minimize the requirement of the voltage headroom. Each gain cell with feedforward offset cancellation and common mode stabilization circuits can make sure its functionality against device mismatch. The chip uses a standard 0.18μm CMOS process. The active area is 0.11mm2. With a single 1.2-V power supply, measurement results show that the 55dB gain, 15MHz bandwidth limiter and the RSSI consume 1.9mA. The FSK demodulator part consumes 300μA.