Logo image
A simple route to fabricate percolated perpendicular magnetic recording media
Conference paper   Peer reviewed

A simple route to fabricate percolated perpendicular magnetic recording media

M. Tofizur Rahman, Chih-Huang Lai, D. Vokoun and Nazmun N. Shams
IEEE Transactions on Magnetics, Vol.43(6), pp.2133-2135
06/2007

Abstract

Anodized aluminum oxide (AAO) Co/Pt multilayers Percolated perpendicular media (PPM) Pinning sites
A simple approach is proposed for fabrication of percolated perpendicular media (PPM). Nano pore array with pore diameter of 12-15 nm and different pore densities has been prepared by anodizing aluminum on silicon wafers. The pore density increases from 3.2 × 10 10 cm -2 to 11.0 × 10 10 cm -2 with the decrease in anodizing voltage from 30 to 10 V. Then, Pt (7 nm)/{Co (0.5 nm)/Pt (2) nm} 5 multilayers are deposited onto this porous anodized alumina (AAO) by sputtering. The pore size is reduced to 10-12 nm after deposition of magnetic layers. The Co/Ft multilayers on AAO exhibit perpendicular magnetic anisotropy, squarness ratios of unity, and negative nucleation fields. The perpendicular coercivity increases linearly with the increase in pore density due to the pinning effect imposed by the pores, which is consistent with theoretical calculation for PPM. © 2007 IEEE.

Metrics

1 Record Views

Details

Logo image