Abstract
The purpose of this paper is to use thermal energy and electrostatic force as an alternative to high-cost precision cutting or traditional injection molding in the fabrication of COC (cyclo-olefin copolymer) plastic aspheric bi-convex lenses with high Blu-Ray transmittance (92% at 405 nm). A glass substrate was used, and ultrasonic drilling defined the clear aperture of the aspheric bi-convex lens. The resulting lenses have a clear aperture of approximately 1.14 mm and a front focal length of 4.97 mm, and the spot size of the fabricated aspheric bi-convex lenses can be controlled to approximately 0.588 μm. This technology is capable of fabricating lenses for application in micro-optical systems. ©2010 IEEE.