Abstract
In this paper, we propose a new power-saving scheme by introducing the pair-wise matching procedure between the subscriber stations (SSs) prior to the uplink data transmission in the WiMax mesh mode. According to the quality-of-service (QoS) requirement, we can preset the desired packet error rate (PER) or signal-to-interference-plus-noise-ratio (SINR) at the receiver end. Given the network topology and the channel state information, the required transmitting power per coded bit at each SS can be calculated. Then we may establish a cost function associated with the required transmitting power per coded bit and thus the optimal matching can be achieved by our proposed minimum weight matching algorithm. The numerical results show the significant improvement of the transmitting power consumption using our proposed method over the conventional scheme when we consider three aspects such as channel effects, coding/modulation options and network topology. © 2008 IEEE.