Abstract
This study designs and realizes a piezoelectric MEMS scanning mirror with large scan angle and high frequency for high-resolution laser beam scanning displays. In Fig. 1 a, this design has three merits: (1) wing-shaped actuators: to serve as the pure torque generator to drive the torsional spring and mirror (1.2mm) with good linearity (since no axial/transverse loads), (2) wing-shaped actuators: to localize the energy at torsional-spring and mirror to achieve large scan angle (at the scanning mode); (3) optimal supporting spring: to suppress the mode coupling and further to lower the stress during scanning. Thus, large scan angle at high scanning frequency is achieved. Measurements demonstrate the scanner has an optical scan angle of 70-degree (mechanical scan angle of ±17.5-degree) at the resonant frequency of 37.7kHz (no vacuum required), which can reach target resolution 1080P, with a unipolar driving voltage of 20V. As summarized in Fig. 7, compared with existing scanners, the performance of the presented one is competitive in FOM (optical scan angle (θ) × mirror size (D)) when driving at resonant frequency.