Logo image
Stacked Ge Nanosheet GAAFETs Fabrication and Strain Effects Measurement
會議論文集

Stacked Ge Nanosheet GAAFETs Fabrication and Strain Effects Measurement

C.-L. Chu, G.-L. Luo, K. Wu, S.-H. Chen, B.-Y. Chen, W.-F. Wu 和 W.-K. Yeh
2020 International Symposium on VLSI Technology, Systems and Applications, VLSI-TSA 2020, 頁碼.128-129
2020

摘要

Etching Fabrication Germanium Multilayers Nanosheets Silicon Temperature Tin alloys VLSI circuits Gate length Ge nanostructures Ge/Si multilayer Island growth Low temperatures Megasonic agitation Selective etching Strain effect Si-Ge alloys
Horizontally stacked Ge nanosheet GAA FETs are demonstrated, although Si, SiGe and GeSn stacked nanosheet FETs have been reported. The problem for formation of stacked pure-Ge nanostructures is that the Ge material is weaker than other IV group materials, and securing Ge material by selective etching away other IV group materials is difficult. In this work, we intentionally grow large mismatch Ge/Si multilayers rather than Ge/GeSi multilayers as the starting material, because the large difference of material properties between Ge/Si is beneficial to the following selective etching process. In order to avoid island growth, Ge/Si multilayers must be grown at a low temperature. For selective etching, we found that, at a proper temperature and with assistance of megasonic agitation, the Si layers can be easily etched away over Ge layers with good selectivity by TMAH solution. Additionally we found the dislocations in suspended Ge sheets are more easily to remove than the case that Ge layers are still tied with Si layers. Finally, the devices with gate length of 80nm were fabricated, and current of over 1650 A/ m (per width of channel footprint) was achieved. © 2020 IEEE.

檔案與連結 (1)

url
https://www.scopus.com/inward/record.uri?eid=2-s2.0-85093683257&doi=10.1109%2fVLSI-TSA48913.2020.9203617&partnerID=40&md5=a0c73aeaf2f3afc76443efb9c8caed2c檢視

相關連結

指標

1 檢視次數

詳細資料

Logo image