Logo image
Fabrication of Metallic Nanotubes by Using Organic Nanowires as the Template
Thesis

Fabrication of Metallic Nanotubes by Using Organic Nanowires as the Template

To-Yao Chang
Masters, 國立清華大學, 材料科學工程學系
2005

Abstract

有機金屬化合物 奈米金屬管 濺鍍 熱處理 AlQ3 Metal nanotubes Sputter Heat treatment
Since Iijima discovered the carbon nanotubes in 1991, other nanotubes such as inorganic and metallic nanotubes have also been intensively studied in the last decade. In recent years, it has been found that some AlQ3 nanostructures like nanowires and nanoparticles can be made by thermal evaporation method. It was also found that AlQ3 nanowires could be formed after annealing of the film. In this study, some metal nanotubes were fabricated by physical vapor deposition using AlQ3 nanowires, which were prepared by heat treatment of the film, as the template. Sputtering was used to deposit Au and Pt layer on nanowires, and thermal evaporation was used for the Ni and Al deposition. The morphology and structure of the metal layer were observed by SEM and TEM. One of the thin-film growth modes, islands mode, was used to explain the formation of the metal layer on AlQ3 nanowires. In addition, the annealing process was used to smoother the surface of Au and Pt layer, and the structure and morphology were analyzed by SEM and TEM again. Although no metal nanotubes have been obtained on expected, a new postulate is proposed to illustrate the above results.

Metrics

1 Record Views

Details

Logo image