Logo image
PVDF模態感應器制動器在主動振動控制應用上的設計與研究
Thesis

PVDF模態感應器制動器在主動振動控制應用上的設計與研究

盧銘詮
Masters, National Tsing Hua University
1992

Abstract

壓電材料 模態感應器制動器 主動振動控制 懸臂梁 Piezoelectric material Modal sensors/actuators Active vibration control Cantilever beam PVDF
共振的發生常常造成結構的破壞或是精度的不準確,在類似硬碟機讀寫頭的設計上,振動的消除便是非常重要的課題。本研究利用壓電材料PVDF輕、薄、易成形的特性,以模態感應器制動器的理論來設計PVDF模態感應器制動器;以迴授的方式來主動控制懸臂梁的振動,減低懸臂梁因不必要的擾動所造成我們無法接受的變形,並克服所謂Spillover的問題。為了印證PVDF模態感應器制動器在實際應用上的可行性,我們設計了第一個模態和第二個模態的感應器和制動器來壓制懸臂梁在第一和第二個共振頻率時所發生的共振。實驗設計的系統模型是以非參數的方法辨別,而迴授控制的控制器是一個常數增益值。最後設計了一組均勻分布、沒有為控制特別模態而成形的感應器和制動器以作為比較。This paper presents a methodology for designing PVDF modalsensors/actuators in an application of vibration control. ThePVDF sensors/actuators are shaped properly to sense/actuate thevibration of a particular mode in order to overcome thespillover problem. Experiments are designed to exam thecapability of the PVDF modal sensors /actuators for vibrationsuppression. The actual system is identified by non-parametricfrequency-domain method and the compensator is designed asconstant gain in the feedback control system design. The PVDFmodal sensors/ actuators, which are shaped to response/actuatethe vibration of the first and the second mode, are designed inthe experiment. The PVDF distributed sensor/actuator, whichare not shaped as modal sensors/actuators of particular mode,are also designed for comparing with the PVDF modal sensors/actuators.

Metrics

1 Record Views

Details

Logo image