Abstract
This research proposes a novel configuration of disk cam mechanism with an intermediate link mounted between cam and oscillating follower. The intermediate link is made triple-arc-faced and pivoted on end-effector. The driving cam has two sets of profiles, which can be either grooved or ribbed form to guarantee the positive-drive motion. Such a configuration of cam mechanism is able, for the first time, to theoretically realize the triple-point contact between cam and oscillating follower. Having multiple contact points yields much lower contact forces exerted between the mating cam and intermediate link. Therefore, the contact stress on cam contour can be correspondingly diminished by a certain amount in comparison with using common oscillating follower in contact with cam at one point. An analytical approach is addressed to illustrate how to synthesize such cam mechanism. For the sake of practicality, the preload is suggested for the elimination of internal clearances between the triple-arc-faced intermediate link and the cam. The results of this research indicates that using the triple-arc-faced follower yields a reduction of the contact stress by 59.9% ~ 81.5% in comparison with using the oscillating roller follower; 23.6% ~ 64.7% in comparison with using the oscillating flat-faced follower; 6.9% ~ 57.1% in comparison with using the oscillating concave-faced follower.