Logo image
半導體晶圓製造派工規則文獻回顧與案例探討
Thesis

半導體晶圓製造派工規則文獻回顧與案例探討

陳肇楷
Masters, 國立清華大學, 工業工程與工程管理學系碩士在職專班
2014

Abstract

派工法則 生產排程 晶圓製造 半導體製造 生產指標 Dispatching Rule production scheduling wafer fabrication semiconductor manufacturing production indices
Abstract In the semiconductor wafer fabrication field, due to its complicated manufacturing process, its production scheduling as well as production control has become very tedious in the semiconductor wafer fab. Therefore, the so-called dispatching rules are thus widely used in this industry. Due to technology development and evolution in the industry and the progress in the manufacturing process, the production process has become more and more complicated, and the scheduling in the production line has become more complicated too. Thus, the response time in the production line should become faster and faster. Moreover, under the influence of the trend of automated production and to cope with the dispatching requirements under different situations, various methods were widely discussed in the academy or industry. In this thesis, literatures in this topic are reviewed, and an attempt is made to investigate the concept of dispatching rule and their purposes. During the three decades from 1980 to 2010, the dispatching rules discussed in the academy and industry were similar. However, instead of being limited to single objective, the dispatching rules investigated in recent years are to act in accordance with the industry development and to cope with different situations, and multiple dispatching rules are mixed to meet the requirements of different production objectives. Therefore, different factories have developed different customized dispatching rules. In the evolution of the semiconductor technology, it goes from the 5 inch wafer in the very beginning, then to 6 inch and 8 inch, and today, 12 inch wafer has become the mainstream in the industry. As the wafer size increases, its technological complexity is higher, and it brings more limitations. Moreover, with the considerations of factors such as automated transport, manual scheduling cannot handle such huge computation in time. This thesis takes a real case of semiconductor wafer fab company as its study target, from the development process of this company, the evolution of automated dispatching rule can be seen for different periods and different production goals. From the present status of development of the factory in this study case, the evolution status of the dispatching method is described. It can be understood from the case study that what kind of dispatching strategy was developed to satisfy what kind of production goal. In this thesis, one dispatching method called PR (Pull Ratio) is proposed to be applied to the factory in the case study so that it can achieve both the goal of balance in the production line and the goal of on-time delivery. In addition, when dispatching problem such as “queuing time limitation” is met, a better control method is proposed to apply in the production dispatching rule for the case study. In addition to the proposal of two better dispatching methods, the development and evolution process of the dispatching method in this study case can just echo the phenomenon seen in the literature review. Finally, two examples are mentioned as possible directions in future study. Keywords: Dispatching Rule, production scheduling, wafer fabrication, semiconductor manufacturing production indices

Metrics

1 Record Views

Details

Logo image