Abstract
Dye Sensitized Solar Cell (DSSC) has been regarded as a potential candidate for the next generation solar cells owing to their acceptable energy conversion efficiency and facile fabrication methods. However, the noble metal, Pt, is still used as counter electrodes and the required fabrication environment is rigid, which can remarkable increase the cost in DSSC.Due to the high conductivity, mechanical strength, and several outstanding physical properties, carbon nanotubes (CNTs) are utilized to replace Pt as catalytic in counter electrodes. Because of the poor adhesion ability and the hydrophobic character of CNTs, making they are hardly utilized to prepare coated CNTs electrode, we induce carboxyl groups to make the surface of CNTs hydrophilic and PEDOT is used as binders. To save utilizing Pt, we prepare CNTs-Pt nanoparticles composite catalytic layers by PEDOT electro-polymerization to be the counter electrode of DSSC, and this method is still not discussed yet.We set two different methods to prepare CNTs-Pt nanoparticles composite. Due to the different functional groups, CNTs grafted with Poly (acrylic acid) is remark CNTs-PAA and CNTs treated with concentrated acid is noted as CNTs-COOH. To fabricate CNTs-Pt nanoparticles composite, the H2PtCl6 is used as precursor and the EDOT monomers are employed as reducing agent. By TEM analysis, we can observe that the Pt nanoparticles are indeed fabricated on CNTs side walls. Moreover, The CNTs-PAA system shows relatively good structural integrity which could still maintain reliable electrochemical properties. With more carboxyl groups of PAA, more negative charge can be utilized to be the spots for growing Pt nanoparticles on the surface of CNTs-PAA.We prepare CNTs-Pt nanoparticles and fix the composite on FTO glasses by PEDOT with electrophoresis process successfully; however, the PEDOT could cover the CNTs-Pt nanoparticles composite completely compared to those without doping Pt. Although Pt should have catalytic effect of the I-/I3- reaction, because Pt also induces the formation of PEDOT. In this way, all the electrochemical properties of CNTs-Pt nanoparticles composite will exhibit as the same as those of PEDOT. The Cell performances are 2.71% for PEDOT-(CNTs-PCOOH)-(Pt nanoparticles) electrode, 2.34% for PEDOT-(CNTs-PAA)-(Pt nanoparticles) electrode, and 1.65% for PEDOT counter electrode, respectively, showing that with more Pt nanoprticles existing on CNTs, the Cell performance is more like that when only pure PEDOT used as counter electrode. Nevertheless, the PEDOT-(CNTs-COOH) electrode shows comparable efficiency 4.89% compared to that of sputtered Pt electrode, 5.52%. This electrode is worth for further study.PEDOT used as binder assists CNTs in increasing adhesion on the FTO glass, but over depositing PEDOT make CNTs-Pt lose its catalytic since PEDOT cover Pt-doped CNTs and shields them completely. How to make CNTs-Pt accessible to external environment and find the optimal composes is the subject that is needed to be explored.