Abstract
In this research, we design a linear phase-locked loop in the driving circuit based on 117-kHz CMOS-MEMS resonator. The PLL circuit provides phase compensation in the CMOS-MEMS oscillator circuit. At the same time, this study also compares with the MEMS oscillator using the conventional phase compensation method. It is found that the phase noise in both approaches are similar. However, the PLL-based MEMS oscillator has a very stable oscillating amplitude, and faster speed to lock on the resonance frequency. We design a traditional linear phase-locked loop (PLL) circuit in the driving loop of a MEMS Oscillator. Compared to digital type or all-digital type PLL circuits, we can use DC offset caused the static phase error (operating point offset) to correct in traditional linear phase locked loop, and adjust the phase difference of input and output signals (about ±10 degrees) to find the exact location of the resonance frequency. Finally, we combine positive feedback and the phase-locked loop circuit to realize a hybrid MEMS oscillator. The overall performance can be adjusted by the proportions of injected signals so as to achieve an oscillator with a fast lock-in time and a stable oscillating frequency.