摘要
Microalgae-based bio-oil offers a promising alternative for sustainable and renewable sources of biolubricants. Howsoever, there have been no studies reporting microalgae-derived biolubricant production through ultrasonic technology. The objective of this work is to observe advancements in microalgae biodiesel process using ultrasonic technology as the foundational for the microalgae-based biolubricant synthesis thru ultrasonic irradiation, which is underexplored. It highlights the potential operating variables and its eligibility by evaluating techno-economic analysis (TEA) and life cycle assessment (LCA). The ultrasonic technology is confirmed to reduce reaction time, lower energy intensive, increase biolubricant yield, and improve the product's characteristics caused by acoustic cavitation, mass transfer enhancement and reaction intensification. The findings indicate that modifying parameters like ultrasonic frequency, power, amplitude, temperature, time, alcohol ratio, catalyst content, and alcohol ratio can achieve perfect conversion (95 – 99%) and high biolubricant yield 80 – 90%. TEA asserts high profitability indicator due to positive net present value (NPV), high return on investment (ROI), rational internal rate of return (IRR) and quicker payback period while LCA allows over 50% of CO2 emission reduction, associated to ultrasonic-assisted biolubricant or biodiesel. Tribological performance of biolubricants produced through ultrasonic methods demonstrates a low friction coefficient and reduced wear, indicating their suitability for commercial applications. This review provides benefits and limitations of ultrasonic process, next experimental roadmaps, process optimization framework and recommended future research directions for the ultrasonic-assisted biolubricant production using microalgae lipids.
[Display omitted]
•Microalgae bio-oil is prospective and promising feedstock in biolubricant process.•Ultrasonic promotes faster process time and less energy consumption.•Optimized variables improves oil conversions (95 – 99%) and biolubricant yields (80 – 90%).•Tribological performance shows a low friction coefficient and reduced wear.•TEA and LCA confirm the eligibility of technical, economical and environmental sectors.