摘要
A novel partially-open-duct heatsink (PODHS) is proposed to enhance natural convection under a vertical orientation. This PODHS maintains an unshrunk virtual chimney effect, associated with an unshrunk volume of the hot plume, above the heatsink as for a closed duct heatsink (CDHS). Simultaneously, it lowers down and uniformizes the temperature of the rising flow in the rear part of a CDHS by swirling in the outside cold air to improve the performance. Above all, this novel PODHS design with a narrow axial opening can be easily manufactured by extrusion. Single-channel computations for convection are conducted for three heatsink samples, a PODHS, a CDHS, and a traditional plate-fin heatsink (PFHS), with common heatsink height of 200 mm, fin width of 2 mm, heatsink base of 3 mm, and fin length of 16 mm. The partial opening widths of the PODHS is 2 mm. The results indicate that the PODHS significantly outperforms a CDHS and the traditional PFHS, especially the latter. Also, a relatively large fin spacing, at least two times of that for the PFHS, can be selected to reduce its weight and cost. Experimental verification of the numerical results is provided by comparing the three different multi-channel heatsinks at two heat transfer rates and one temperature difference between the heatsink base and the ambience.