Abstract
The objective of this study was to provide fundamental knowledge of arsenate sorption on lithium/aluminum layered double hydroxide intercalated by chloride (Li/Al LDH-Cl) and further to reveal the contribution of exposed positive charge surface of Li/Al LDH-Cl created by intercalating LiCl into Al(OH) 3 layers to arsenate sorption. Therefore, sorption isotherms, envelopes and extended X-ray absorption fine structure (EXAFS) technique were employed to examine the reaction of arsenate on Li/Al LDH-Cl and on gibbsite. Based on an isotherm study, the sorption maximum of Li/Al LDH-Cl for arsenate was approximately six times higher than that of gibbsite. Sorption envelopes of arsenate on Li/Al LDH-Cl displayed a pH-sensitive behavior from pH 4.0 to 7.0, but it was insensitive to pH above pH 7.0, approaching to the pH pzc of Li/Al LDH-Cl (7.22). This transformation with shifted pHs illustrated that there were two types of reaction sites within Li/Al LDH-Cl that participate in arsenate sorption; one is pH-sensitive and the other is not. From EXAFS analysis, arsenate sorbed on Li/Al LDH, reacted not only with Al in the edges of Al-(OH) 3 layers, but also with Li located in the vacant octahedral sites within Al(OH) 3 layers; however, the decreasing intensity of As(V)-Al shells with increasing pH represented there were fewer As(V)-Al complex existed at higher pH, i.e., the complex between arsenate and Al is pH-sensitive. The superior sorption capability of Li/Al LDH-Cl to that of gibbsite could be attributed to the intercalated Li cations which served as the permanent sorption sites and made the surface of Al(OH) 3 have high affinity to arsenate. © 2006 American Chemical Society.