摘要
U-shaped cantilever actuators made from PET and PMMA exhibit a bimorph effect upon radiation heating and beam always moves toward PMMA side with maximum displacement and displacing rate measured to be 2100 μm and 35 μm s −1 . This number increases to 3300 μm and 55 μm s −1 while PET surfaces are coated with single-walled carbon nanotubes acting as heat reservoir. Actuations can be further improved by carbon nanotube resistive heating and improvement reaches two-fold (4100 μm and 68.3 μm s −1 ). Coated beam actuators exhibit an excellent stability over 2 h intermittent operations where the maximum displacement varies only in ±1%.