摘要
After the revelation of nonvisual lighting impact on human health, the lighting engineers are more concerned about the human benign light with low cost and high efficiency. The solution-processed fabrication technique with smart device engineering for high efficacy OLED devices is being anticipated to drastically reduce the fabrication cost leading to affordable desired end product. The co-host matrix could be a potential solution to improve device performance multi-folds with suitable band-gap engineering and most effective energy transfer from mixed host to guest. Here, rationally configured device architecture with two novel host materials possessing wide energy gap, high triplet energy, and excellent thermal and morphological stability resulted in highly-efficient solution-processed green, red and low color temperature (CT) OLEDs with sub-bandgap level driving voltage of 2.1 V i.e. record lowest within its own category. Perfect triplet energy match of our newly developed host materials with commercial p-type host m-MTDATA and the common phosphors enabled efficient energy transfer with very low energy loss led to high efficiency of resulting OLED. The resultant solution-processed triplet emitter based green and red OLED devices displayed a maximum efficacy of 75.0 and 30.2 lm W −1 without using light extraction out-coupling techniques, respectively. The designed blue-hazard free 2048 K low CT OLED exhibited a η PE of 44.5 lmW −1 , a η CE of 47.6 cdA -1 and an EQE of 20.7% as the maximum value, the highest known so far within its own category. The melatonin suppression sensitivity (MSS) of the engineered low CT OLED is only 1.0% to that of the 480 nm blue light, which is much safer compared to other light sources. The impact of our design engineering was established by fabricating 1 cm × 1 cm device area prototype.