Logo image
Design, Fabrication, and Characterization of n-Si IBC Solar Cells Using PERC Technology
期刊文章

Design, Fabrication, and Characterization of n-Si IBC Solar Cells Using PERC Technology

Yin-Wei Peng, Chun-Heng Chen, Li-Yu Li, Pi-Yu Hsin, Peichen Yu, Chorng-Jye HuangJon-Yiew Gan
IEEE Journal of Photovoltaics, 卷.10(2), 頁碼.383-389
03/2020

摘要

Interdigitated-back-contact cell (IBC) and passivated emitter and rear cell (PERC) Electronic Optical and Magnetic Materials Condensed Matter Physics Electrical and Electronic Engineering
In this article, high-efficiency n-Si interdigitated back contact solar cells (IBC) were fabricated with the perc-like process. The cell was demonstrated with the efficiency of 22.16% (cell area = 10 × 10 cm), open-circuit voltage of 685 mV, short-circuit current density of 41.21 mA/cm , and fill factor of 78.48%. The low fill factor can be attributed to the high base recombination taking place under high-level injection. Fill factor over 81% and, therefore, cell efficiency over 23% is expected when wafers of high bulk lifetime (τ ≥ 10 ms) or low resistivity (ρ ≤ 1 Ω·cm) are used. The light I-V curve was fully characterized with the optical and electronic properties obtained from independent measurements.

相關連結

指標

1 檢視次數

詳細資料

Logo image