Abstract
In this study, a novel HARM (high aspect ratio micromachining) micromanipulator fabricated on (1 1 1) silicon wafer is reported. The micromanipulator consists of a positioning stage, a robot arm, supporting platforms, conducting wires, and bonding pads. These components are monolithically integrated on a chip through the presented processes. The three-degrees-of-freedom (3-DOF) positioning of the micromanipulator is realized by using the integration of two linear comb actuators and a vertical comb actuator. The robot arm is used to manipulate samples with dimension in the order of several microns to several hundred microns, for instance, optical fibers and biological samples. The robot arm could be a gripper, a needle, a probe, or even a pipette. Since the micromanipulator is made of single crystal silicon, it has superior mechanical properties. A micro gripper has also been successfully designed and fabricated.