Abstract
The effects of tantalum (Ta) adhesion layer on the ferroelectric and microstructural properties of sol-gel-derived SrBi 2 Ta 2 O 9 (SBT) films are reported in this study. Compared to the traditional titanium (Ti) adhesion layer, the Ta adhesion layer results in more favorable, highly (115) textural structure of SBT films and therefore higher polarization and dielectric constant. The remnant polarization value of the SBT films crystallized at 750 °C increases from 11.1 to 14.2 μC/cm 2 at 5 V, and the dielectric constant increases from 175 to 225. The observed improvement in the electrical properties of SBT films is ascribed to the superior microstructure of Pt thin film on Ta, which has been characterized by x-ray diffraction spectrum (XRD). XRD patterns clearly indicate that the Ti adhesion layer favors c-axis crystalline structure that is undesirable for ferroelectric properties. Moreover, secondary ion mass spectrometer profiles strongly indicate that Ti atoms diffuse deeply into the bulk of SBT thin films after crystallization annealing. By using Ta as the adhesion layer material, this inhomogeneous interdiffusion phenomenon can be effectively suppressed, eliminating the formation of TiO x interfacial layer, and possibly decreasing the occurrence of undesirable second phase compound. © 2001 American Institute of Physics.