摘要
This paper presents an electrohydrodynamic emulsification scheme that is capable of producing sub-femtoliter aqueous droplets on demand. A pressure-controlled flow focusing scheme is enhanced by integrating a time-varying electric field, which induces electric forces locally on the water-oil interface. More specifically, electric forces act against interfacial tension and trigger the breakup of droplets via tip streaming. PDMS microfluidic chips with embedded solid electrodes and diaphragm valves are utilized to realize the proposed on-demand droplet formation scheme. In the prototype demonstration, a low melting-point alloy mixed with magnetic nanoparticles was inductively heated and injected into microchannels to form solid electrodes. It is demonstrated that the emulsification process is controlled by the applied fluid pressures and electric field, but not limited by the minimum width of flow channel. Extremely small droplets with volumes less than 1 femtoliter can be readily produced. By applying a voltage ramp of 8 kV/s (0–400 V in 50 ms) across a distance of 6 mm, droplets with diameters less than 1 μm were successfully produced. The higher the voltage ramp rate, the smaller the resulting droplet volume. By adjusting the voltage ramp rate accordingly, on-demand formation of a droplet stream with preset diameter order was demonstrated. As such, the demonstrated emulsification scheme could potentially realize the controllability of electric field on the on-demand formation of extremely-small droplets, which is desired for a variety of applications.