Abstract
Rutile nanowires were grown along the [001] direction and perpendicular to the fluorine doped tin oxide coated glass substrate (R by a solvothermal process using titanium isopropoxide as the precursor in acidic solution. The edge length of the nanowires obtained in isopropyl alcohol is ten times less than that of the nanowires obtained in water. Due to the high ionic diffusion rate along the rutile [001] direction and good optical transmittance, R was used as an electrochromism electrode. When -2 V was applied, the color of the electrode became blue with a 60% change in the transmittance for 30 s due to the cathodic polarization potential in LiClO 4 /PC electrolyte (where PC is propylene carbonate). The lithium ion intercalated/extracted densities of R, P25-coated and rutile nanowires-coated electrodes are 138.6/129.1 mC cm -2 , 93.6/83.2 mC cm -2 and 31.7/15.9 mC cm -2 respectively. After 50 cycles, the R electrode still performs very well. Furthermore, a large amount of sodium cation intercalation into TiO 2 was observed for the first time at -1.0 V. According to these results, the R electrode is a promising candidate to be a multi-function device. © 2011 The Royal Society of Chemistry.