摘要
Non-precious hydrogen evolution catalysts with ultrahigh catalytic efficiency and stability are essential for commercial green hydrogen production. Boosting quality and quantity of active sites of the catalyst through electronic and nanostructure engineering are the keys. Here, nanostructure and electronic engineering of NiMo alloys are realized through integration of CNT networks as the catalyst hosting substrate and decoration of the NiMo alloy with Cu clusters, leading to a commercially viable hydrogen evolution catalyst. The Cu cluster decorated NiMo alloy achieve ultra-low overpotentials of 16, 91, and 126 mV at −10, −500, and −1000 mA cm−2, respectively, and operate stably under industrially relevant operation conditions, −1000 mA cm−2 in 20 wt% KOH at 70 °C, for 1000 h. The CNT network provides a conductive and porous substrate that facilitates electrodeposition of primary NiMo alloy nanocrystals and secondary NiMo alloy nanoparticles of 2 and 32 nm in sizes, respectively, offering abundant exposed highly active sites. DFT calculations reveal that Cu decoration on the NiMo surface moderates the overly strong hydrogen adsorption on NiMo to better balance the adsorption and desorption of hydrogen for much enhanced catalytic activities. The strategy of combined electronic and nanostructure engineering proves effective for development of advanced hydrogen evolution catalysts and can be readily extended to a wide range of electrochemical catalytic processes.
Non-precious hydrogen evolution catalysts of ultrahigh catalytic efficiency and stability are developed through nanostructure and electronic engineering of NiMo alloys, realized via integration of CNT networks as the catalyst hosting substrate and decoration of the NiMo alloy nanocrystals with Cu clusters, leading to a commercially viable hydrogen evolution catalyst. The Cu cluster decorated NiMo alloy nanocrystals achieve ultra-low overpotentials of 126 mV at −1.0 A cm−2 and operate stably under industrially relevant operation conditions, −1.0 A cm−2 in 20 wt% KOH at 70 °C, for 1000 hours. [Display omitted]
•Develop a commercially viable non-precious electrocatalyst for hydrogen evolution•Cu cluster decorated NiMo alloy nanocrystals of 2 nm in size were synthesized.•Achieve an ultra-low overpotential of 126 mV at a current density of −1.0 A cm−2•Operate stably under industrially relevant operation conditions for 1000 h•Cu decoration downshifts the d-band center of NiMo for large catalytic enhancements.