Logo image
Enhancing performance and stability of methylammonium lead iodide-based perovskite solar cells using single-crystal precursors
期刊文章   同儕審查

Enhancing performance and stability of methylammonium lead iodide-based perovskite solar cells using single-crystal precursors

Shafna Kunnathumpeedika, Vidya Kattoor 和 Tzu-Chien Wei
Communications materials, 卷.7(1), 頁.117
17/03/2026
Web of Science ID: WOS:001756091300002

摘要

639/301/1005/1007 706/4066/4069 Article Chemistry and Materials Science 一般 Materials Science
Methylammonium lead iodide (MAPbI3)–based perovskites are often regarded as unstable under light and heat; however, previous studies have not fully clarified the influence of residual lead iodide (PbI2) in thin films, which may have led to misinterpretations of their intrinsic stability. In this work, we propose a precursor-engineering strategy in which pre-synthesized MAPbI3 single crystals are re-dissolved to prepare coating solutions, thereby producing MAPbI3 films free of residual PbI2. Devices fabricated using this method achieved a power conversion efficiency (PCE) of 21.55%, significantly higher than the 18.61% obtained from control devices prepared using conventional precursor solutions. Moreover, the single crystal-derived devices exhibited remarkable long-term stability, retaining 98% of their initial efficiency after 1000 h of storage, whereas the control devices degraded to below 50% of their initial performance. Extensive characterizations of the single crystal-derived films revealed the degradation pathways induced by residual PbI2 in MAPbI3, confirming the superiority of this precursor design strategy. Importantly, these single crystal-derived films were further applied in mini-modules, achieving a PCE of 19.82% under 1-sun illumination and 39.66% under 6000 lux indoor light, underscoring their great potential for both outdoor and indoor photovoltaic applications.

檔案與連結 (1)

url
https://doi.org/10.1038/s43246-026-01123-y檢視
已出版(紀錄版本)

相關連結

指標

1 檢視次數

詳細資料

Logo image