摘要
An experimental investigation of horizontal forced vibration effect on void fraction variation of subcooled boiling flow was carried out in this study. In order to simulate the fuel assembly subchannel of a boiling water reactor (BWR), an annular test section with inner and our diameters of 19.1 and 38.1 mm was utilized for subcooled boiling tests under atmospheric pressure. The annular test section was attached to an eccentric-cam vibrator, which was driven by a low-speed motor and can produce horizontal forced vibrations with frequency up to 20 Hz and maximum displacement of 22.2 mm. The inlet liquid velocity and subcooling were set as v f , in = 0.25–1.00 m/s and ΔT Sub = 5–20 °C. Different heat fluxes of q″ = 0.058–0.193 MW/m 2 were loaded through the center heater rod, and the void fraction and fluid temperature were measured during the tests under stationary (no vibration) and vibration conditions. Test results show that in the subcooled boiling region, the void fraction and fluid temperature can vary under horizontal forced vibrations, and the variation trends were presented in N Zu -N Sub and v f , in -〈α〉 plots. These variations can be explained by the potential changes of thermal boundary layers (TBL) and the heat transfer enhancement under vibrations. In addition, no significant change of void fraction and fluid temperature was found in or near the saturated boiling conditions under vibrations.