摘要
In this study, the vertical upward air–water two-phase flow tests have been carried out to investigate the distribution of local and global void fractions in a rod bundle channel under low-flow conditions. The height of the rod bundle channel is about 5 m, and the channel cross section is comprised of a 52 × 52 mm rectangular casing and 3 × 3 circular rods. The rods with a diameter of 11.5 mm and a pitch of 15.4 mm were set as a rectangular array. Four sets of non-intrusive conductivity sensors were built to measure the local and global void fractions of various gaps within the rod bundle channel. The tests were operated at low flow conditions: j g = 0.016–0.92 m/s and j f = 0.02–0.05 m/s, which covered the possible flow regimes of bubbly, cap-bubbly and cap-turbulent flows. The measured global void fraction were benchmarked with existing one-dimensional drift-flux model, and the local void fractions have been summed up by regions and compared with the global void fraction for validation. The dynamic characteristics of local/global void fractions have been analyzed with probability density function (PDF) and fast Fourier transform (FFT), and the distributions and variations of averaged void fraction against test conditions have been presented. Furthermore, the empirical correlations for estimating the local void fractions have been proposed, which can successfully estimate the local void distribution from global void fraction with limited errors. The present results and correlations can be a reference for future development and modification of detailed two-phase flow models in the rod bundle geometry.