Logo image
Fabrication and characterization of ZnO nanowires array electrodes with high photocurrent densities: Effects of the seed layer calcination time
期刊文章   同儕審查

Fabrication and characterization of ZnO nanowires array electrodes with high photocurrent densities: Effects of the seed layer calcination time

Yi-Jing Lu, Ching-Fang Liu, Chi-Chang Hu, Jen-Hou KuoRajender Boddula
Materials Chemistry and Physics, 卷.189, 頁碼.56-63
03/2017

摘要

Calcination time Hydrothermal synthesis Photo-electrochemical response Seed layer ZnO nanowire Materials Science (all) Condensed Matter Physics
In this work, we demonstrate that vertically grown ZnO nanowire (NW) arrays of the wurzite phase were successfully fabricated on fluorine doped tin oxide (FTO) substrates via a hydrothermal method. The coating of a seed layer onto the FTO substrates was found to favor the growth of a uniform ZnO NWs array which shows saturation in the photocurrent density with a relatively low potential bias. Furthermore, prolonging the calcination time of the seed layer makes the ZnO NWs behave the better charge separation and improve the photo-electrochemical performance. Under the irradiation at a 75 mW cm −2 from a simulated sunlight source, the ZnO NWs array electrode prepared from the seed layer with calcination at 350 °C for 5 h shows a saturated photocurrent density of 514 μA cm −2 and a maximum half-cell solar-to-hydrogen (HC-STH) efficiency of 0.26% was obtained at 0.6 V versus reversible hydrogen electrode (RHE) in neutral electrolyte.

相關連結

指標

1 檢視次數

詳細資料

Logo image