Abstract
In this article, an alternative method is presented to fabricate a planar-type oxide-confined 850-nm vertical-cavity surface-emitting laser (VCSEL). The threshold voltage, threshold current, light output power, external differential quantum efficiency, emission spectrum, and dynamic response of VCSELs planarized with a silicon oxide (Si Ox) have been evaluated. These devices exhibit excellent static characteristics, including a threshold voltage (Vth) of 2.05 V corresponding to a threshold current of 0.88 mA, a minimum threshold current of 0.7 mA near 60 °C, a maximum output power of 4.28 mW at 11 mA, a maximum external differential quantum efficiency (ηex) of 43% just above threshold, and an operation temperature beyond 130 °C. In addition, the transverse modes of the device initially are low-order, while high-order modes appear at elevated current levels. The fundamental transverse mode at the longest wavelength increases with injected current with a redshift of 0.49 nmmA due to the Joule effect. Since the thermal resistance of the VCSEL with a Si Ox buried layer is less than that of device without it, the VCSEL with the buried layer displays less redshift and better performance. Finally, the VCSEL with a Si Ox buried layer shows a clear eye-opening feature as operating at 2.488 Gbits with a bias current of 2 mA. Further increasing the current level, the device can work at the maximum bit rate of 8 Gbits and a bias current of 3.7 mA. © 2005 American Vacuum Society.