Logo image
In-situ X-ray studies of high-entropy layered oxide cathode for sodium-ion batteries
期刊文章

In-situ X-ray studies of high-entropy layered oxide cathode for sodium-ion batteries

Chia-Ching Lin, Hao-Yu Liu, Jin-Wei Kang, Chun-Chi Yang, Chih-Heng Li, Hsin-Yi Tiffany Chen, Shao-Chu Huang, Chung-Sheng Ni, Yu-Chun Chuang, Bo-Hao Chen, …
Energy Storage Materials, 卷.51, 頁碼.159-171
10/2022

摘要

Cathode materials High-entropy composition O3-type layered structure oxides Operando X-ray technique Sodium-ion batteries Renewable Energy Sustainability and the Environment Materials Science (all) Energy Engineering and Power Technology
High-entropy oxides (HEOs) are promising electrode materials for sodium-ion batteries (SIBs) owing to their remarkable electrochemical properties and excellent cycling stability. A high-entropy O3-type layer-structured NaCu 0.1 Ni 0.3 Fe 0.2 Mn 0.2 Ti 0.2 O 2 (NCNFMT) was synthesized using the Pechini method, as a new cathode material for SIBs. Herein, density functional theory calculations were used to understand the formation energy of NCNMFT, proving its synthesizability. Battery testing revealed a reversible capacity of 130 mAh g −1 , with a capacity retention of up to 87% after 100 cycles at 0.1C, and excellent long-term cycling stability (approximately 71% after 500 cycles at 0.5C). The prepared material also exhibited an outstanding Coulombic efficiency of 98% and a high energy efficiency of 95%. Furthermore, the high entropy effect was investigated using energy dispersive spectroscopy and X-ray absorption fine structure to prove that the material contains a single phase with well-distributed metal ions. The operando synchrotron X-ray diffraction demonstrated that the phase transition was delayed until the extraction of 0.32 sodium ion from NCNFMT, which indicates the stabilization of the O3-phase induced by the high entropy effect. Furthermore, the quasi-solid-state NCNFMT||polyethylene oxide-Na 3.2 Ca 0.1 Zr 1.9 Si 2 PO 12 ||Na cells exhibited excellent performance with a high discharge capacity of 112 mAh g −1 and retention of 78% after 100 cycles. The above results demonstrate the advantages of HEOs as potential cathode materials for SIBs.

相關連結

指標

1 檢視次數

詳細資料

Logo image