Logo image
Influence of annealing temperature on the structural, optical and mechanical properties of ALD-derived ZnO thin films
期刊文章   同儕審查

Influence of annealing temperature on the structural, optical and mechanical properties of ALD-derived ZnO thin films

C.-Y. Yen, S.-R. Jian, G.-J. Chen, C.-M. Lin, H.-Y. Lee, W.-C. Ke, Y.-Y. Liao, P.-F. Yang, C.-T. Wang, Y.-S. Lai, …
Applied Surface Science, 卷.257(17), 頁碼.7900-7905
06/2011

摘要

AFM Atomic layer deposition Hardness Nanoindentation XRD ZnO thin films Surfaces Coatings and Films
ZnO thin films grown on Si(1 1 1) substrates by using atomic layer deposition (ALD) were annealed at the temperatures ranging from 300 to 500 °C. The X-ray diffraction (XRD) results show that the annealed ZnO thin films are highly (0 0 2)-oriented, indicating a well ordered microstructure. The film surface examined by the atomic force microscopy (AFM), however, indicated that the roughness increases with increasing annealing temperature. The photoluminescence (PL) spectrum showed that the intensity of UV emission was strongest for films annealed at 500 °C. The mechanical properties of the resultant ZnO thin films investigated by nanoindentation reveal that the hardness decreases from 9.2 GPa to 7.2 GPa for films annealed at 300 °C and 500 °C, respectively. On the other hand, the Young's modulus for the former is 168.6 GPa as compared to a value of 139.5 GPa for the latter. Moreover, the relationship between the hardness and film grain size appear to follow closely with the Hall-Petch equation. © 2011 Elsevier B.V. All rights reserved.

相關連結

指標

1 檢視次數

詳細資料

Logo image