Abstract
A series of copolyarylates primarily based upon 2,6-naphthalene dicarboxylic acid, hydroxybenzoic acid and 4,4′-biphenol were prepared by slurry-melt polymerization with Santotherm 66 as a heat exchange medium. The frequently used kinky monomer, resorcinol or isophthalic acid, was introduced into these copolyarylates to modify the chemical strcture. The relationship of the thermal behavior and the crystalline structures for these copolymers was studied by means of DSC and wide angle X-rays diffraction. The amount of mcorporated kinky modifier was found to produce a significant effect on the liquid crystalline phase and the melting temperature of the copolyarylates. All of these liquid crystal polymers exhibited nematic textures; shreaded and/or Schlieren type, depending upon the incorporated kinky monomer. The liquid crystal polymers modified by isophthalic acid (up to 40 mole % of 2,6-naphthalene dicarboxylic acid replaced by isophthalic acid) possessed shreaded texture however high the temperatures of the polymer melts were. The liquid crystal polymers modified by resorcinol (60 to 100 mole % of 4, 4′-biphenol replaced by resorcinol), however, would have two types of nematic textures: the shreaded texture occurred when the temperature of the polymer melt was between the melting temperature and the anisotropic transition temperature; the Schlieren texture existed when the temperature of the polymer melt was high above the anisotropic transition temperature. The Schlieren texture formed only when a liquid crystal polymer revealed good flowability and lower rigidity. The polydomain concepts could be utilized to explain the observed textures of these copolyarylates clearly. © 1994 Polymer Society.