摘要
This article presents detailed microstructure characterization of cemented carbide fabricated by selective laser melting process. Nickel-coated tungsten carbide powders were used for this study; the selective laser melting process induced complex microstructure consisting of partially-melted carbide, carbide precipitates and dendritic microstructure. Four phases were identified, i.e. MC, M 2 C, FCC and η in the as-built specimen. CALPHAD phase diagram was utilized to describe possible phase formation sequence during selective laser melting process, which involved melting, solidification and repeated heating. Although the composition of initial powder was very simple (spherical W 2 C-WC and Ni-coating), selective laser melting allowed the decomposition of initial carbides, subsequent formation of dendritic structure and precipitation of additional carbides. To the best of authors’ knowledge, for the first time, detailed microstructure characterization of cemented carbide fabricated by selective laser melting is presented.