Abstract
Among different process routes for Cu(In,Ga)Se 2 (CIGS) solar cells, sufficient Se supply is commonly required to obtain high-quality CIGS films. However, supplying extra Se increases the cost and the complexity. In this work, we demonstrate that extra Na incorporation can substantially increase efficiency of Se-deficient CIGS solar cells, fabricated by sputtering from a quaternary CIGS target without extra Se supply, from 1.5% to 11.0%. The Se-deficient CIGS device without extra NaF reveals a roll-over I-V curve at room temperature as well as significantly reduced J sc and fill factor at low temperatures. The electrical characteristics of Se-deficient CIGS films are well explained and modeled by the low p-type doping due to high density of compensating donors and the presence of deep defects possibly originating from the anti-bonding levels of Se vacancies. The significant improvement after extra Na incorporation is attributable to the Na-induced passivation of Se vacancies and the increased p-type doping. Our result suggests that extra Na addition can effectively compensate the Se deficiency in CIGS films, which provides a valuable tuning knob for compositional tolerance of absorbers, especially for the Se-deficient CIGS films. We believe that our findings can shine light on the development of novel CIGS processes, distinct from previous ones fabricated in Se-rich atmosphere. Adding extra Na to Se-deficient Cu(In,Ga)Se 2 (CIGS) films, fabricated by one-stage sputtering from a CIGS target without extra Se supply, significantly improves the device performance, from 1.5% to 11.0%. The detrimental defects induced by Se deficiency could be removed not only by supplying extra Se during CIGS formation but also by increasing Na content in the film. This approach shines light on the development of novel low-cost CIGS processes without extra Se supply