Logo image
Nonlinearity reduction in piezoelectric MEMS scanning mirrors: Design, modeling, and experimental characterization
期刊文章   同儕審查

Nonlinearity reduction in piezoelectric MEMS scanning mirrors: Design, modeling, and experimental characterization

Hao-Chien Cheng, Mingching Wu 和 Weileun Fang
Sensors and actuators. A. Physical, 卷.412, 頁.118490
16/12/2026
Web of Science ID: WOS:001881230200001

摘要

KNN film Micro scanner Multiple-scales perturbation method Nonlinear Piezoelectric actuator THD
Microelectromechanical systems (MEMS) scanning mirrors are miniaturized optical devices widely used for applications such as augmented reality displays and LiDAR systems, where large optical scan angles are required. However, nonlinearity at high deflection angles leads to resonant frequency shifts, harmonic distortion, and degraded performance in optical projections. This study identifies primary nonlinearity sources in piezoelectric MEMS scanners through FEM simulations and experimental analysis of two reference scanners. A theoretical model based on the forced Duffing equation and multiple-scales perturbation method is used to analyze harmonic distortion induced by geometric nonlinearity. To suppress geometric nonlinearity, the transmission spring connecting the mirror plate and the actuator is reoriented parallel to the torsional axis, enhancing in-plane compliance and reducing peak von Mises stress by 30% at large scanning angles, as verified by FEM simulations. Devices fabricated on SOI wafers using lead-free potassium sodium niobate (KNN) thin films achieve a 124° optical scanning angle. Nonlinearity reduction is demonstrated quantitatively through the extracted nonlinearity coefficient and measured total harmonic distortion (THD), and qualitatively through laser beam projection experiments. Compared with Reference 1 device, the proposed design reduces THD from 27.12% to 7.68% and lowers the nonlinearity coefficient from 577.32/ε to 90.83/ε. Laser beam projection experiments further confirm enhanced linearity, producing near-ideal line segment lengths and eliminating bifurcation artifacts. These results demonstrate that targeted stress reduction in the transmission spring effectively achieves more linear resonant operation, providing practical design guidelines for high-performance piezoelectric MEMS scanning mirrors in compact optical systems. [Display omitted] •A piezoelectric MEMS scanning mirror reorients the transmission spring to suppress geometric nonlinearity at large angles.•Forced Duffing equation with multiple-scales perturbation models harmonic distortion induced by geometric nonlinearity.•Reorienting the transmission spring enhances in-plane compliance, reducing peak stress at large scanning angles.•Lead-free KNN devices on SOI wafers achieve large scan angles with reduced harmonic distortion.•Laser beam projection experiments confirm near-ideal line segments and elimination of bifurcation artifacts.

相關連結

指標

1 檢視次數

詳細資料

Logo image