Abstract
The establishment and control for a switched-reluctance generator (SRG) are presented in this paper. First, the switching behavior and the dc-link ripple characteristics of a SRG are studied. Accordingly, its circuit and control models are established. And the power circuit components are properly designed to minimize the dc-link voltage ripples caused by commutation and pulsewidth modulation switching. Second, the quantitative voltage feedback control of the SRG system considering the effects of voltage ripples is made. In this issue, a unified approach is developed to estimate the plant dynamic model parameters from measurements. Then conversely, the feedback controller is designed according to the prescribed regulation voltage control specifications. Third, a dynamic commutation shift controller (DSC) is devised to enhance the voltage control performance of a SRG. As the voltage feedback control is failed when winding current becomes single-pulse mode, the proposed DSC is actuated automatically. The turn-on and turn-off angles are dynamically and automatically shifted to assist voltage feedback regulation control. More stable and better regulation control performance can be obtained. Finally, the energy conversion efficiency improvement via static commutation shift under static operation is evaluated experimentally. Theoretical bases of the proposed control approaches are derived, and their effectiveness is demonstrated by some simulation and measured results. © 2007 IEEE.