摘要
Diffusion barrier properties of Ta films with and without plasma treatments have been investigated in the study. The nitrogen-incorporated Ta films were prepared by NH 3 plasma treatment or reactive sputtering. Barrier properties were evaluated by sheet resistance, X-ray diffraction, transmission electron microscopy, X-ray photoelectron spectroscopy and reverse-biased junction leakage current. An amorphous-like TaN x layer was formed on Ta barrier film after plasma treatments. The thickness of the amorphous TaN x layer is about 3 nm and NH 3 plasma-treated Ta films (TaN x /Ta) possess lower resistivity and smaller grain sizes. The Cu/TaN x /Ta(10 nm)/Si remained stable after annealing at 750 °C for 1 h. NH 3 plasma-treated Ta films (TaN x /Ta) possess better thermal stability than Ta and TaN films. It is attributed to the formation of a new amorphous layer on the surface of Ta film after the plasma treatments. For thermal stability of Cu/Ta(-N)/n + -p diodes, Cu/Ta/n + -p and Cu/TaN/n + -p junction diodes resulted in large reverse-bias junction leakage current after annealing at 500 and 525 °C, respectively. On the other hand, TaN x /Ta diffusion barriers will improve the integrity of Cu/Ta(-N)/n + -p junction diodes to 650 °C. © 2005 Elsevier B.V. All rights reserved.