Abstract
Single-crystal atomic-layer-deposited (ALD) Y 2 O 3 films 2 nm thick were epitaxially grown on molecular beam epitaxy (MBE) GaAs(001)-4 × 6 and GaAs(111)A-2 × 2 reconstructed surfaces. The in-plane epitaxy between the ALD-oxide films and GaAs was observed using in-situ reflection high-energy electron diffraction in our uniquely designed MBE/ALD multi-chamber system. More detailed studies on the crystallography of the hetero-structures were carried out using high-resolution synchrotron radiation X-ray diffraction. When deposited on GaAs(001), the Y 2 O 3 films are of a cubic phase and have (110) as the film normal, with the orientation relationship being determined: Y 2 O 3 (110)[001][110]//GaAs(001)[110][110]. On GaAs(111)A, the Y 2 O 3 films are also of a cubic phase with (111) as the film normal, having the orientation relationship of Y 2 O 3 (111)[211] [011]//GaAs (111) [211][011]. The relevant orientation for the present/future integrated circuit platform is (001). The ALD-Y 2 O 3 /GaAs(001)-4 × 6 has shown excellent electrical properties. These include small frequency dispersion in the capacitance-voltage CV curves at accumulation of ~7% and ~14% for the respective p- and n-type samples with the measured frequencies of 1 MHz to 100 Hz. The interfacial trap density (Dit) is low of ~10 12 cm -2 eV -1 as extracted from measured quasi-static CVs. The frequency dispersion at accumulation and the Dit are the lowest ever achieved among all the ALD-oxides on GaAs(001).