摘要
A chirped mirror designed with 60 fs 2 in group delay dispersion and reflectance large than 97.5% in the bandwidth between 700 and 900 nm by open-sourced thin film filter design software is presented. The chirped mirrors are then fabricated by an ion-assisted deposition coater. First, the optical constants of the thin films deposited by specific process parameters are calibrated by trial runs with single-layer samples measured by variable-angle spectroscopic ellipsometer; then factors are entered to compensate for the settings on film thickness. Afterward, the spectral phase of the coated mirrors is measured by polarization gating frequency-resolved optical gating whereas the reflectance is measured by photo-spectrometer. In conclusion, the measured results indicate a reasonable match with the design goals to show the effectiveness of the proposed method. It is noted that ion-assisted electron gun evaporation coating systems are applicable to the mass production of chirped mirrors employed for ultrafast lasers.