Abstract
The microstructure and electrical behaviour of calcium-modified BaTiO 3 ceramics of compositions (a) (Ba 1-x Ca x )TiO 3 , (b) Ba(Ti 1-x Ca x )O 3-x and (c) (Ba 1-x/2 Ca x/2 ) (Ti 1-x/2 Ca x/2 ) O3 3-x/2 have been investigated. These characteristics are observed to vary systematically with the cationic ratio, α = (Ba + Ca)/Ti, rather than the amount (x-value) and sites that Ca 2+ ions are supposed to occupy. A large uniform grain microstructure and normal dielectric behaviour are obtained for α ≤ 1.01 samples (groups I and II), whereas an ultra-fine grain microstructure and diffuse phase transformation (DPT) characteristics are observed for α ≥ 1.08 samples (groups III). The latter is proposed to be the suppression of tetragonal to cubic transformation due to the formation of second phase. When the sintering atmosphere is changed from air to H 2 /N 2 mixture, the electrical resistivity decreases and dielectric loss increases tremendously for α = 0.99 samples (groups I), whereas the high electrical resistivity and low dielectric loss characteristics are preserved for α ≥ 1.01 samples (groups II and III). The mechanism by which the cationic ratio improves the resistance of the materials to a reducing atmosphere is proposed to be the formation of hexagonal BaTiO 3-δ phase which consumes the oxygen vacancies generated. © 1991 Chapman and Hall Ltd.