Logo image
The oxidation behavior of three different zones of welded Incoloy 800H alloy
期刊文章   同儕審查

The oxidation behavior of three different zones of welded Incoloy 800H alloy

W.S. Chen, W. Kai, L.W. TsayJ.J. Kai
Nuclear Engineering and Design, 卷.272, 頁碼.92-98
06/2014

摘要

Nuclear and High Energy Physics Nuclear Energy and Engineering Materials Science (all) Safety Risk Reliability and Quality Waste Management and Disposal Mechanical Engineering
The oxidation behavior of three different zones of welded Incoloy 800H alloys, containing the substrate (800H-SUB), heat-affected zone (800H-HAZ) and the melt zone (800H-MZ) was studied at 950 °C in dry and wet air. The steady-state oxidation rate constants (k <sub>p</sub> values) were calculated based on the mass-gain data, and the oxidation resistant ability of the alloys followed by the rank of 800H-MZ > 800H-SUB > 800H-HAZ in dry air. The scales formed on the 800H-SUB and 800H-HAZ consisted of a heterophasic mixture of Cr <sub>2</sub> O <sub>3</sub> and FeCr <sub>2</sub> O <sub>4</sub> , while a mixture of Cr <sub>2</sub> O <sub>3</sub> and MnCr <sub>2</sub> O <sub>4</sub> was observed on the 800H-MZ. On the other hand, the oxidation kinetics of the alloy, initially followed the parabolic-rate law up to 48 h, while a significant mass-lost kinetics was observed for a prolong exposure in wet air. The detail oxidation mechanisms for the alloys in both environments were investigated. © 2014 Elsevier B.V.

相關連結

指標

1 檢視次數

詳細資料

Logo image